DA2 HD 4K |
|
specification |
|
Frame rate1 |
24, 25, 30, 50, or 60 fps |
Chroma sampling1 |
4:4:4, 4:2:2, or 4:2:0 |
Color bit depth1 |
8 bits per color |
Signal type |
HDMI 1.4, HDCP 1.4 |
Max. video data rate |
10.2 Gbps (3.4 Gbps per color) |
|
|
|
|
Video |
NOTE |
*Appropriate DVI-D to HDMI cables or adapters are required for DVI signal input/output. | |
Maximum data rate |
10.2 Gbps (3.4 Gbps per color) |
Maximum pixel clock |
300 MHz |
Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz, 12-bit color, 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz |
Formats |
RGB and YCbCr digital video |
Standards |
DVI 1.0*, HDMI 1.4, HDCP 1.4 |
NOTE |
Extron strongly recommends compatibility testing while designing, and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Application Engineer for more information. | |
|
Video input |
Number/signal type |
1 single link HDMI (or DVI-D*) |
Connectors |
1 female 19-pin HDMI type A |
|
Video output |
Number/signal type |
2 single link HDMI (or DVI-D*) |
Connectors |
2 female 19-pin HDMI type A |
|
Control/communications |
Serial control port |
RS-232, 3.5 mm, 3-pole captive screw connector |
Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, non-parity |
Serial control pin configuration |
1 = Tx, 2 = Rx, 3 = GND |
USB control port |
1 front panel, female, mini USB B |
USB standards |
USB 2.0, low speed |
Program control |
Extron Simple Instruction Set (SIS¢â) |
|
General |
Power |
External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts |
Power consumption |
|
Device |
3.3 watts |
Device and power supply |
4.3 watts |
Temperature/humidity |
Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensing Operating: +32 to +122 ¡ÆF (0 to +50 ¡ÆC) / 10% to 90%, noncondensing |
Cooling |
Convection, vents on top |
Thermal dissipation |
|
Device |
8.9 BTU/hr |
Device and power supply |
12.4 BTU/hr |
Mounting |
|
Rack mount |
Yes, with optional rack shelf kit |
Enclosure type |
Metal |
Enclosure dimensions |
1.0" H x 4.3" W x 3.0" D (one quarter rack wide) 2.5 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors) |
Product weight |
0.35 lbs (0.2 kg) |
Shipping weight |
2 lbs (1 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
Environmental |
Complies with the appropriate requirements of RoHS, WEEE. |
Warranty |
3 years parts and labor
|