| TeamWork 600 and 600i Kit |
|
| Switcher |
| Maximum data rate |
6.75 Gbps (2.25 Gbps/color) |
| Maximum pixel clock |
165 MHz |
| Resolution |
Up to 1080p @ 60 Hz or 720p/1080i @ 120 Hz, 12-bit color |
| Serial control port |
(1) RS-232, 3.5 mm captive screw connector, 5 pole |
| Contact closure |
3.5 mm captive screw connector |
| Power supply |
Internal,
Input: 100-240 VAC, 50-60 Hz |
| Power consumption |
|
| Device and power supply |
TBD |
| Enclosure dimensions |
1.75" H x 17.5" W x 12.0" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 30.5 cm D) |
|
| System Controller |
| Connectors |
|
| IPL T PC1 |
1 female USA/Edison power connector |
| IPL T PC1i |
1 female IEC power connector |
| Voltage |
|
| IPL T PC1 |
120 VAC, 50-60 Hz |
| IPL T PC1i |
220 VAC, 50-60 Hz |
| Maximum AC load |
|
| IPL T PC1 |
12A, 1440 watts at 120 VAC |
| IPL T PC1i |
10A, 2200 watts at 220 VAC |
| Serial control port |
(1) RS-232 only, 3.5 mm captive screw connector, 4 pole |
| Serial control pin configuration |
1 = Tx, 2 = Rx, 3 = GND, 4 = +5 VDC |
| Power supply |
Internal:
100-240 VAC, 50-60 Hz, 5 watts |
| Enclosure dimensions |
1.75"H x 4.3" W x 6.0" D (1U high, quater rack wide)
(4.4 cm H x 10.9 cm W x 15.2 cm D) |
|
| Cable Cubby |
| Min./max. table thickness |
0.375" to 3.00" (0.95 cm to 7.62 cm) |
| Top plate (outer rim) |
8.36" W x 6.82" D (21.23 cm W x 17.32 cm D) |
| Surface cutout (inside rim) |
7.89" W x 6.35" D (20.04 cm W x 16.13 cm D) |
|
| HDMI SM "Show Me" Cable |
| Standards |
High speed HDMI® cable |
| Contacts |
Gold Plated |
| Material |
Conductors: tinned copper, 30 AWG
Drain wire: tinned copper, 32 AWG
Shielding: fluorocopolymer tape binder, tinned copper braid |
| Connector dimensions |
1.40" L x 0.77" W x 0.44" thick (35.6 mm L x 19.7 mm W x 11.1 mm thick) |
| Overall length |
6' (1.8 m) measured neck-to-neck |
