TeamWork 400 and 400i Kit |
|
Switcher |
Maximum data rate |
6.75 Gbps (2.25 Gbps/color) |
Maximum pixel clock |
165 MHz |
Resolution |
Up to 1080p @ 60 Hz or 720p/1080i @ 120 Hz, 12-bit color |
Serial control port |
(1) RS-232, 3.5 mm captive screw connector, 5 pole |
Contact closure |
3.5 mm captive screw connector |
Power supply |
External, Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1A, 12 watts |
Power consumption |
|
Device and power supply |
3.8 watts, 12 VDC |
Enclosure dimensions |
1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) (4.4 cm H x 22.2 cm W x 7.6 cm D) |
|
System Controller |
Connectors |
|
IPL T PC1 |
1 female USA/Edison power connector |
IPL T PC1i |
1 female IEC power connector |
Voltage |
|
IPL T PC1 |
120 VAC, 50-60 Hz |
IPL T PC1i |
220 VAC, 50-60 Hz |
Maximum AC load |
|
IPL T PC1 |
12A, 1440 watts at 120 VAC |
IPL T PC1i |
10 A, 2200 watts at 220 VAC |
Serial control port |
(1) RS-232 only, 3.5 mm captive screw connector, 4 pole |
Serial control pin configuration |
1 = Tx, 2 = Rx, 3 = GND, 4 = +5 VDC |
Power supply |
Internal: 100-240 VAC, 50-60 Hz, 5 watts |
Enclosure dimensions |
1.75"H x 4.3" W x 6.0" D (1U high, quater rack wide) (4.4 cm H x 10.9 cm W x 15.2 cm D) |
|
Cable Cubby |
Min./max. table thickness |
0.375" to 3.00" (0.95 cm to 7.62 cm) |
Top plate (outer rim) |
8.36" W x 6.82" D (21.23cm W x 17.32cm D) |
Surface cutout (inside rim) |
7.89" W x 6.35" D (20.04 cm W x 16.13 cm D) |
|
HDMI SM "Show Me" Cable |
Standards |
High speed HDMI¢ç cable |
Contacts |
Gold Plated |
Material |
Conductors: tinned copper, 30 AWG Drain wire: tinned copper, 32 AWG Shielding: fluorocopolymer tape binder, tinned copper braid |
Connector dimensions |
1.40" L x 0.77" W x 0.44" thick (35.6 mm L x 19.7 mm W x 11.1 mm thick) |
Overall length |
6' (1.8 m) measured neck-to-neck |