IN1606 |
|
Video input |
Number/signal type |
2 RGB, RGBcvS, component video (YUVi or YUVp/HDTV), S-video, composite video 4 HDMI digital video (HDCP compliant) |
Connectors |
2 female 15-pin HD 4 female HDMI |
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
Minimum/maximum levels |
Analog: 0.0 V to 1.0 Vp-p with no offset at unity gain |
Impedance |
75 ohms |
Horizontal frequency |
15 kHz to 100 kHz |
Vertical frequency |
24 Hz to 120 Hz |
Resolution range |
640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2k *reduced blanking |
Return loss |
>30 dB @ 5 MHz |
DC offset (max. allowable) |
1.5 V |
|
Video processing |
Decoder |
12 bit digital (3D-adaptive comb filter) |
Analog sampling |
12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB) |
Digital pixel data bit depth |
8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI) |
Colors |
1 billion (10 bit processing) |
|
Video output |
Number/signal type |
2 HDMI (HDCP) |
Connectors |
2 female HDMI |
Scaled resolution |
640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9,1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9,1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8 HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz |
|
Sync |
Input type |
RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video |
Input standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
Input level |
2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video with tri-level sync 0.3 Vp-p for component video with bi-level sync or RGsB |
Input impedance |
Horizontal: 510 ohms Vertical: 510 ohms |
Max. input voltage |
5.0 Vp-p |
|
Audio |
Gain |
Unbalanced output: -6 dB; balanced output: 0 dB |
Frequency response |
20 Hz to 20k Hz, ¡¾0.5 dB |
THD + Noise |
<0.1%, 20 Hz to 20k Hz at nominal level |
S/N |
>90 dB at maximum balanced output (unweighted) |
Crosstalk |
=-80 dB @ 1 kHz, fully loaded |
Stereo channel separation |
>80 dB @ 1 kHz |
Bass |
+12 dB to -24 dB @ 100 Hz |
Treble |
+12 dB to -24 dB @ 8 kHz |
|
Audio input |
Number/signal type |
6 stereo line balanced or unbalanced 2 mono mic/line balanced or unbalanced (with available phantom power) 4 stereo, de-embedded from HDMI (PCM only) |
Connectors |
(6) 3.5 mm, 5 pole captive screw connectors for line (2) 3.5 mm, 3 pole captive screw connector for Mic/Line 4 female HDMI type A |
Impedance |
>10k ohms unbalanced, >20k ohms balanced |
Nominal level |
Line inputs: +4 dBu, -10 dBV, adjustable Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable |
Maximum level |
Line inputs: +21 dBu balanced, +15 dBu unbalanced Mic/line inputs: +12 dBV (2 Vrms) when gain is set to 0 dB |
Input gain adjustment |
Line inputs: -18 dB to +24 dB, 1 dB steps, adjustable per input Mic/line inputs: -18 dB to +60 dB, 1 dB steps, adjustable per input |
DC phantom power |
+48 VDC ¡¾10% (can be switched on or off per Mic/line input) |
|
Audio output |
Number/signal type |
1 balanced or unbalanced stereo (variable) 1 balanced or unbalanced stereo; can be configured as stereo or two independently mixed mono channels 2 HDMI embedded |
Connectors |
(2) 3.5 mm captive screw connectors, 5 pole 2 female HDMI |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Gain error |
¡¾0.5 dB channel to channel |
Maximum level (Hi-Z) |
>+12 dBu, balanced; >+6 dBu, unbalanced |
Output volume range |
0 to -100 dB in 1 dB steps |
|
Control/remote |
NOTE |
The front panel USB port and rear panel RS-232 port are independent of each other and can be used at the same time. | |
Serial control port |
1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole |
Baud rate and protocol |
9600, 8 data bits, 1 stop bit, no parity (default) |
USB control ports |
1 front panel female mini USB B |
USB standards |
USB 2.0, high speed |
Ethernet control port |
1 female RJ-45 connector |
Ethernet data rate |
10/100Base-T, half/full duplex with autodetect |
Ethernet protocol |
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet, SMTP |
Program control |
Extron control/configuration program for Windows¢ç Extron Simple Instruction Set (SIS¢â) Microsoft¢ç Internet Explorer¢ç, Telnet |
|
General |
Power supply |
Internal Input: 100-240 VAC, 50-60 Hz |
Power consumption |
26 watts |
Temperature/humidity |
Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensing Operating: +32 to +122 ¡ÆF (0 to +50 ¡ÆC) / 10% to 90%, noncondensing |
Cooling |
Passive, side and top vents |
Thermal dissipation |
68.7 BTU/hr |
Mounting |
|
Rack mount |
Yes, with included, pre-installed brackets |
Enclosure type |
Metal |
Enclosure dimensions |
1.75" H x 17.5" W x 10.5" D (1U high, full rack wide) (4.4 cm H x 44.4 cm W x 26.7 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.) |
Product weight |
4.9 lbs (2.2 kg) |
Shipping weight |
TBD |
DIM weight |
TBD |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
Environmental |
Complies with the appropriate requirements of RoHS, WEEE. |
Warranty |
3 years parts and labor |