모델	제품 버전 정보	품번 #
	SW2 DP	Two Input DisplayPort	60-1210-01

The Extron SW2 DP is a two input, one output DisplayPort switcher. The SW2 DP is HDCP compliant and supports data rates up to 10.8 Gbps and computer resolutions up to 2560x1600 @ 60 Hz. It features EDID Minder^®, which maintains continuous EDID communication with connected devices and ensures that the DisplayPort sources power up properly and maintain correct video output. The SW2 DP provides automatic input cable equalization up to 25 feet at 2560x1600 @ 60 Hz on Extron DisplayPort Series cable. Multiple control points, including front panel, RS-232, and auto-input switching, simplify integration into a variety of system designs. The SW2 DP switcher is ideal for applications that require the routing of two DisplayPort sources to a single display.

To enhance and streamline integration, the SW2 DP offers integrator-friendly features, including automatic input cable equalization, and indicators for monitoring and troubleshooting. Automatic input cable equalization restores and reshapes incoming signals, reducing the need for additional signal conditioning equipment by compensating for weak source signals or signal loss from a long input cable. Additionally, the SW2 DP provides immediate visual confirmation of EDID status, HDCP authentication, and signal presence for each port via LED indicators.

Housed in a 1U, half rack width metal enclosure, the SW2 DP can be mounted in a rack or installed beneath a desk. It includes an external, universal power supply for worldwide power compatibility.

특징

Switches DisplayPort video and embedded multi-channel digital audio signals

Inputs: Two female DisplayPort connectors

Output: One female DisplayPort connector

EDID Minder^® automatically manages EDID communication between connected devices — EDID Minder ensures that sources power up properly and reliably output content for display.

Supports DisplayPort data rates up to 10.8 Gbps

Supports PC resolutions up to 2560x1600 @ 60 Hz and HDTV 1080p/60


HDCP compliant

Automatic input cable equalization to 25 feet (7.6 meters) at 2560x1600 @ 60 Hz with Extron DisplayPort cables — Actively conditions incoming DisplayPort signals to compensate for signal loss when using long cables, low quality cables, or a source device with poor signal output.

EDID status, HDCP authentication, and signal presence LED indicators — Front-panel LED indicators for signal presence and HDCP authentication provide real-time feedback and monitoring of key performance parameters. The tri-color EDID LED indicator on the back panel notifies whether an internal or external EDID is stored.

Front panel security lockout — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the switcher from the front panel.

Multiple control points including front panel, RS-232, and auto-input switching — Offers integration flexibility into a variety of control environments.

Rack-mountable, 1U half rack width metal enclosure

Energy-efficient external universal power supply included, replacement part # 70-775-01 — Provides worldwide compatibility, low power consumption, and reduced operating costs.



SW2 DP
Video
Maximum bit rate	Up to 10.8 Gbps (2.7 Gbps per lane)
Maximum pixel clock	268 MHz
Resolution range	Up to 2560x1600 @ 60 Hz
Formats	RGB and YCbCr digital video
Standards	DisplayPort 1.1a, HDCP
Video input
Number/signal type	2 DisplayPort
Connectors	2 female DisplayPort
Input cable length	Up to 25' (7.6 m)
Video output
Number/signal type	1 DisplayPort
Connectors	1 female DisplayPort
Output cable length	Up to 25' (7.6 m)
Control/remote — switcher
Serial control port	1 RS-232, 3.5 mm captive screw connector, 5 pole (shared with auto-input switching)
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations	1 = Tx, 2 = Rx, 3 = GND
Contact closure	(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232) for auto-input switching
Contact closure pin configuration	Pins 4 and 5 shorted together enable auto-input switching.
USB control port	1 front panel female mini USB B
USB standards	USB 2.0, low speed
Program control	Extron Simple Instruction Set (SIS™)
General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts
Power consumption
Device	TBD
Device and power supply	TBD
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Thermal dissipation
Device	TBD
Device and power supply	TBD
Mounting
Rack mount	Yes, with optional rack shelf or back of the rack mounting kit
Enclosure type	Metal
Enclosure dimensions	1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) (4.4 cm H x 22.2 cm W x 7.6 cm D) (Depth excludes connectors.)
Product weight	0.5 lbs (0.2 kg)
Shipping weight	2 lbs (1 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Environmental	Complies with appropriate requirements of RoHs and WEEE.
Compliances	CE, FCC Class A, VCCI
MTBF	30,000 hours
Warranty	3 years parts and labor