| TP Series Receivers |
|
| Video |
| Number/signal type |
1 or 2 sets of proprietary analog signals |
| Connectors |
1 or 2 shielded RJ-45 female |
|
| Video input — refer to the TP Transmitters Family User's Manual, part #68-546-02 |
|
| Video output |
| Number/signal type |
|
| TP R BNC A |
1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source |
| TP R BNC AV |
1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source
and 1 NTSC/PAL/SECAM composite video |
| TP R 15HD A |
1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source |
| NOTE |
These products output component video with bi-level sync only. | |
| Connectors |
|
| TP R BNC A |
5 BNC female |
| TP R BNC AV |
6 BNC female |
| TP R 15HD A |
(1) 15-pin HD female |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.3 V to 1.45 Vp-p |
| Impedance |
75 ohms |
| Maximum resolution |
1600x1200 |
| NOTE |
Refer to the user's manual for the maximum distances recommended for specific resolutions. | |
|
| Audio |
| Number/signal type |
1 or 2 sets of analog proprietary signals |
| Connectors |
1 or 2 shielded RJ-45 female |
| Frequency response |
20 Hz to 20 kHz, >±0.05 dB |
| THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at maximum output (unweighted) |
| S/N |
>63 dB at nominal level |
| Crosstalk |
<-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>80 dB @ 1 kHz |
| CMRR |
>33 dB @ 20 Hz to 20 kHz |
|
| Audio input — refer to the TP Transmitters Family User's Manual, part #68-546-02 |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output |
| Number/signal type |
|
| TP R BNC A |
1 stereo audio balanced/unbalanced, and 1 stereo audio unbalanced |
| TP R 15HD A |
1 stereo audio balanced/unbalanced |
| TP R BNC AV |
2 stereo audio balanced/unbalanced, and 2 stereo audio unbalanced |
| Connectors |
|
| TP R 15HD A |
(1) 3.5 mm, 5-pole captive screw connector per input |
| All other models |
2 female RCA (left/right) per input |
| |
(1) 3.5 mm, 5-pole captive screw connector per input |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.1 dB channel to channel |
| Maximum level (600 ohm) |
>+11.5 dBm, balanced at 1%THD+N |
|
| General |
| Recommended cable type |
Enhanced Skew-Free™ A/V UTP Cable or CAT 5/5e/6 (shielded or unshielded) |
| Power |
|
| TP R BNC AV |
100 VAC to 240 VAC, 50-60 Hz, 40 watts, internal |
| External power supply |
|
| All models except TP R BNC AV |
100 VAC to 240 VAC, 50-60 Hz, external; to 15 VDC, 0.8 A, regulated |
| Power input requirements |
|
| TP R BNC A |
15 VDC, 0.3 A (minimum) |
| TP R 15HD A |
15 VDC, 0.34 A (maximum) |
| Temperature/humidity |
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
| Rack mount |
|
| TP R 15HD A |
Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01; RSB 129, 60-604-01); 1U, 6" deep rack shelf (RSU 126, #60-190-10; RSB 126, 60-604-10); or 1U, 3.5" deep rack shelf (RSF 123, #60-190-20 or RSB 123, #60-604-20; RSB 123, 60-604-20) |
| TP R BNC A, TP R BNC AV |
Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01; RSB 129, 60-604-01) |
| Pole mount |
|
| TP R BNC A, TP R BNC AV |
Yes, with optional pole mounting kit PMK 100 (part #70-217-01) or PMK 200 (#70-077-04) |
| Enclosure type |
Metal |
| Enclosure dimensions |
|
| TP R BNC A |
1.3" H x 8.75" W x 7.0" D (<1U high, half rack wide)
(3.3 cm H x 22.2 cm W x 17.8 cm D)
(Depth excludes connectors.) |
| TP R BNC AV |
1.7" H x 8.75" W x 7.0" D (1U high, half rack wide)
4.3 cm H x 22.2 cm W x 17.8 cm D
(Depth excludes connectors.) |
| TP R 15HD A |
1.6" H x 4.25" W x 3.0" D (1U high, quarter rack wide)
(4.1 cm H x 10.8 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| Product weight |
|
| TP R BNC A |
1.6 lbs (0.7 kg) |
| TP R BNC AV |
2.6 lbs (1.2 kg) |
| TP R 15HD A |
0.4 lbs (0.2 kg) |
| Shipping weight |
|
| TP R BNC A |
4 lbs (2 kg) |
| TP R BNC AV |
5 lbs (3 kg) |
| TP R 15HD A |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety |
CE, CUL, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
