Resolution range |
Up to 1600x1200 or 1080p @ 60 Hz pixel for pixel; higher resolutions up to 1920x1200 @ 60 Hz, undersampled |
Formats |
RGB and YCbCr digital video |
Standards |
DVI 1.0, HDMI 1.2 |
|
Video input — transmitter |
Number/signal type |
1 single link DVI-D (or HDMI*) |
Connectors |
1 female DVI-I |
|
Video output — receiver |
Number/signal type |
1 single link DVI-D (or HDMI*) |
Connectors |
1 female DVI-I |
Nominal level |
0.8 Vp-p |
Video delay |
1-2 frames |
|
Audio |
Gain |
|
Range |
Adjustable, -18 dB to +10 dB |
Default |
Unbalanced output: 0 dB |
Frequency response |
20 Hz to 20 kHz, ¡¾0.5 dB |
THD + Noise |
0.10% @ 1 kHz at nominal level |
S/N |
>80 dB at maximum output (unweighted) |
CMRR |
65 dB @ 20 Hz to 20 kHz |
Audio bits per sample |
18 bits per channel, 2 channels (L, R) |
Sampling rate |
48 kHz |
|
Audio input — transmitter |
Number/signal type |
1 unbalanced stereo or 2 unbalanced mono |
Connectors |
(1) 3.5 mm mini stereo jack |
Impedance |
18k ohms unbalanced, DC coupled |
Nominal level |
-10 dBV (316 mVrms) |
Maximum level |
+8.9 dBV, (unbalanced) at 1% THD+N |
NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
Audio output — receiver |
Number/signal type |
1 unbalanced stereo or 2 unbalanced mono |
Connectors |
(1) 3.5 mm mini stereo jack |
Impedance |
50 ohms unbalanced |
Nominal level |
-10 dBV (316 mVrms) |
Maximum level (Hi-Z) |
+7.6 dBu, unbalanced at 1% THD+N |
Maximum level (600 ohm) |
>+6.3 dBu, unbalanced at 1% THD+N |
Audio delay |
1.5 frames |
|
Control/remote |
Serial control ports on each unit (transmitter and receiver) |
Control |
1 RS-232, 2.5 mm mini stereo jack (front panel) |
Pass-through |
1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel) |
Baud rate and protocol |
|
Control |
9600 baud, 8 data bits, 1 stop bit, no parity |
Pass-through |
9600 to 115,200 baud |
Program control |
Extron control/configuration program for Windows¢ç Extron Simple Instruction Set¢â (SIS¢â) |
|
General |
External power supply |
100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
Power input requirements |
12 VDC, 0.6 A |
Temperature/humidity |
Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensing Operating: +32 to +122 ¡ÆF (0 to +50 ¡ÆC) / 10% to 90%, noncondensing |
Cooling |
Convection, vents on top and side panels |
Thermal dissipation |
|
Transmitter |
|
115 VAC, 60 Hz |
7.7 BTU/hr |
240 VAC, 50 Hz |
11.0 BTU/hr |
Receiver |
|
115 VAC, 60 Hz |
7.2 BTU/hr |
240 VAC, 50 Hz |
10.5 BTU/hr |
Mounting |
|
Rack mount |
Yes, with optional rack shelf |
Furniture mount |
Yes, with optional under desk mounting kit |
Enclosure type |
Metal |
Enclosure dimensions |
1.0" H x 4.3" W x 6.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.) |
Product weight |
0.7 lbs (0.3 kg) per unit, 1.4 lbs (0.6 kg) per pair |
Shipping weight |
3 lbs (2 kg) per unit, 6 lbs (3 kg) per pair |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, FDA Class 1, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
MTBF |
30,000 hours |
Warranty |
3 years parts and labor |