| Resolution range |
Up to 1600x1200 or 1080p @ 60 Hz pixel for pixel; higher resolutions up to 1920x1200 @ 60 Hz, undersampled |
| Formats |
RGB and YCbCr digital video |
| Standards |
DVI 1.0, HDMI 1.2 |
|
| Video input — transmitter |
| Number/signal type |
1 single link DVI-D (or HDMI*) |
| Connectors |
1 female DVI-I |
|
| Video output — receiver |
| Number/signal type |
1 single link DVI-D (or HDMI*) |
| Connectors |
1 female DVI-I |
| Nominal level |
0.8 Vp-p |
| Video delay |
1-2 frames |
|
| Audio |
| Gain |
|
| Range |
Adjustable, -18 dB to +10 dB |
| Default |
Unbalanced output: 0 dB |
| Frequency response |
20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise |
0.10% @ 1 kHz at nominal level |
| S/N |
>80 dB at maximum output (unweighted) |
| CMRR |
65 dB @ 20 Hz to 20 kHz |
| Audio bits per sample |
18 bits per channel, 2 channels (L, R) |
| Sampling rate |
48 kHz |
|
| Audio input — transmitter |
| Number/signal type |
1 unbalanced stereo or 2 unbalanced mono |
| Connectors |
(1) 3.5 mm mini stereo jack |
| Impedance |
18k ohms unbalanced, DC coupled |
| Nominal level |
-10 dBV (316 mVrms) |
| Maximum level |
+8.9 dBV, (unbalanced) at 1% THD+N |
| NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output — receiver |
| Number/signal type |
1 unbalanced stereo or 2 unbalanced mono |
| Connectors |
(1) 3.5 mm mini stereo jack |
| Impedance |
50 ohms unbalanced |
| Nominal level |
-10 dBV (316 mVrms) |
| Maximum level (Hi-Z) |
+7.6 dBu, unbalanced at 1% THD+N |
| Maximum level (600 ohm) |
>+6.3 dBu, unbalanced at 1% THD+N |
| Audio delay |
1.5 frames |
|
| Control/remote |
| Serial control ports on each unit (transmitter and receiver) |
| Control |
1 RS-232, 2.5 mm mini stereo jack (front panel) |
| Pass-through |
1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel) |
| Baud rate and protocol |
|
| Control |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Pass-through |
9600 to 115,200 baud |
| Program control |
Extron control/configuration program for Windows®
Extron Simple Instruction Set™ (SIS™) |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements |
12 VDC, 0.6 A |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, vents on top and side panels |
| Thermal dissipation |
|
| Transmitter |
|
| 115 VAC, 60 Hz |
7.7 BTU/hr |
| 240 VAC, 50 Hz |
11.0 BTU/hr |
| Receiver |
|
| 115 VAC, 60 Hz |
7.2 BTU/hr |
| 240 VAC, 50 Hz |
10.5 BTU/hr |
| Mounting |
|
| Rack mount |
Yes, with optional rack shelf |
| Furniture mount |
Yes, with optional under desk mounting kit |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.) |
| Product weight |
0.7 lbs (0.3 kg) per unit, 1.4 lbs (0.6 kg) per pair |
| Shipping weight |
3 lbs (2 kg) per unit, 6 lbs (3 kg) per pair |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, FDA Class 1, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
