HOME > AV 신호변환컨버터 > 영상디코더 (AV신호->RGB / HDMI 변경) > 컴포지트,Svideo신호를 RGB신호로
확대보기

[14212]EXTRON USP 507 / SC / DI/DVI / DI/SC / DI/HD-SDI [가격문의]
스   펙 : USP 507 / USP 507 SC / USP 507 DI/DVI / USP 507 DI/SC / USP 507 DI/HD-SDI
제조사 : Extron (익스트론)
수   량 :
판매가 : 0 원
적립금 : 0 원
100000이상 구매시 무료배송 납품/납기 견적요청은 전화주시기 바랍니다.
장바구니담기 바로주문하기
이전화면

Features

  • All-in-one scaler, video transcoder, and digital-to-analog video converter with optional analog-to-digital video and scan conversion

  • Inputs: Two RGB or HD component video on 15-pin HD; configurable input on BNCs for RGB, HD component video, S-video, or composite video; component video, S-video, or composite video on BNCs; S-video or composite video on BNCs; DVI-D; and optional SDI/HD-SDI

  • Outputs: Simultaneous scaled outputs as RGB or HD component video on BNCs, 15-pin HD, and Extron MTP Twisted Pair output; optional fourth output for DVI-D, HD-SDI, or scan-converted component video, S-video, or composite video

  • Integrated seven-input presentation switcher — The USP 507 allows for switching between DVI, RGBHV, component video, and S-video or composite video sources. An SDI/HD-SDI input is available as an option.

  • Auto Input Format Detection — For each input, the USP 507 can be set to detect the incoming signal format, automatically reconfiguring itself to provide the appropriate decoding and signal processing. This feature can reduce the number of required outputs for a matrix switcher, lowering system cost while improving manageability.

  • RGB, HDTV, and video scaling — RGB computer-video, high definition video, and standard definition video sources can all be scaled to the desired output resolution.

  • RGB upscaling and downscaling — The USP 507 features an advanced scaling engine with high quality upscaling and downscaling of high resolution computer-video signals.

  • Optional SDI/HD-SDI input — SDI or HD-SDI signals from cameras or other professional video equipment can easily be integrated into presentations with the optional SDI/HD-SDI input board.

  • Four simultaneous outputs — Two high resolution RGB or component video outputs are available, as well as Extron MTP Twisted Pair output. An optional fourth output can be configured as DVI, HD-SDI, or scan-converted video.

  • RGB or component video output

  • Extron MTP Twisted Pair output — The USP 507 provides built-in transmission of RGB or component video signals over twisted pair cables for long distance transmission to a remote display. A compatible Extron MTP Series Twisted Pair Receiver is required.

  • Optional DVI, HD-SDI, or scan-converted output — In addition to the RGBHV and twisted pair outputs, a flexible output expansion port can be populated to support optional DVI, HD-SDI, or scan converter output boards. When populated, these boards serve as a third Program output and offer additional system capabilities to support recording or digital signal transmission.

  • 81 output rates from 640x480 to 1920x1200, including HDTV 1080p/60 — A total of 81 output rates are available, including computer-video rates up to 1920x1200, and HDTV rates up to 1080p/60.

  • Image freeze control — A live image can be frozen the freeze button on the front panel, or through RS-232 serial control and IP Link Ethernet control.

  • Image capture — An image can be captured as a snapshot of the live video output, and stored as a BMP file on the USP 507 or downloaded to a PC for archiving.

  • Auto-Image™ — At the press of a button, the unit analyzes the incoming video signal and then automatically adjusts sizing, centering, and filtering to optimize image quality. This can save time and effort in fine tuning displayed images.

  • Auto Input Memory — When activated, the USP 507 automatically stores size, position, and picture settings based on the incoming signal. When the same signal is detected again, these image settings are automatically recalled from memory.

  • EDID emulation — The USP 507 provides a means for specifying the rate of the incoming DVI or VGA signal through the RS-232 serial port. EDID emulation allows proper communication with the video source.

  • Glitch-free switching — Switching is glitch-free between RGB and video inputs with selectable cut or fade to black transitions. Presentations are enhanced by eliminating distracting visual jumps, glitches, and distortion commonly seen when switching between computer and video sources.

  • PIP - picture-in-picture — Allows a video source to be displayed within an RGB image, or vice versa. Several preprogrammed PIP window options are available, including side-by-side windows, with dynamic, fully adjustable window positioning.

  • Picture controls for brightness, contrast, color, tint, detail, as well as horizontal and vertical positioning, sizing, and zoom — 16 memory presets are available for each input to store all image settings.

  • Aspect ratio conversion — Any video input can be adjusted horizontally and vertically to meet a specific aspect ratio requirement. Alternatively, the input aspect ratio may be specified as 4:3 or 16:9 and fixed.

  • Front panel security lockout — This feature locks out all front panel functions except for input selection; all functions however, are available through RS-232 control.

  • Automatic 3:2 and 2:2 pulldown detection — The USP 507 offers advanced film mode processing techniques that help maximize image detail and sharpness for NTSC, PAL, and HDTV 1080i sources that originated from film.

  • Motion adaptive 1080i to 1080p deinterlacing — The USP 507 provides high performance deinterlacing for 1080i signals from HD sources including broadcasts and Blu-ray Disc, delivering optimized image quality through advanced motion compensation.

  • Quad standard video decoding — The USP 507 uses a digital, four-line adaptive comb filter to decode NTSC 3.58, NTSC 4.43, PAL, and SECAM for integration into systems worldwide.

  • IP Link® Ethernet control — IP Link enables the USP 507 to be controlled and proactively monitored over a LAN, WAN, or the Internet.

  • RS-232 control port — Using serial commands, the USP 507 can be controlled and configured via the Extron Windows®-based control program, or integrated into control systems. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming.

  • RS-232 pass-through control for Extron audio switchers — The USP 507 provides a RS-232 serial loop-through port, allowing RS-232 commands to be passed on to an Extron audio switcher.

  • Rack-mountable 1U, full rack width metal enclosure

  • Internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility.
    USP 507 Series
    Video input
       Number/signal type  2 RGBHV, RGBS, RGsB, component video (Y, R-Y, B-Y; progressive or HD)
    1 RGBHV, RGBS, RGsB, component (Y, R-Y, B-Y; interlaced, progressive, HD) S-video, composite video
    1 component video (Y, R-Y, B-Y; interlaced), S-video, composite video
    1 S-video, composite video
    1 DVI-D
    1 optional SDI, HD-SDI
       Connectors  2 female 15-pin HD: RGBHV, RGBS, RGsB, component video
    5 female BNC: RGBHV, RGBS, RGsB, component video, S-video, composite video
    3 female BNC: component video, S-video, composite video
    2 female BNC: S-video, composite video
    1 female DVI-I: DVI-D
    1 female BNC: optional SDI, HD-SDI
       Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
    0.8 Vp-p for SDI
    0.7 Vp-p for RGB and for R-Y and B-Y of component video
    0.3 Vp-p for C of S-video
       Minimum/maximum levels  Analog: 0.0 V to 2.0 Vp-p with no offset
       Impedance  75 ohms
       Horizontal frequency  Autoscan 15 kHz to 100 kHz
       Vertical frequency  Autoscan 50 Hz to 120 Hz
       Resolution range  640x480 to 1920x1200*, 480p, 576p, 720p, 1080i, and 1080p, digitized pixel for pixel; higher resolutions are undersampled.
    *Reduced blanking
       Return loss  <-30 dB @ 5 MHz
       DC offset (max. allowable)  0.5 V
    Video processing
       Encoder (for scan converted output)  10 bit digital
       Digital sampling  30 bit, 10 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB, YUVp)
       Colors  1 billion, 1024 per color channel
       Horizontal filtering (for scan converted output)  3 levels
       Vertical filtering (for scan converted output)  3 levels
       Encoder filtering (for scan converted output)  3 levels
    Video output
       Number/signal type  2 buffered scaled RGBHV, RGBS, RGsB, or scaled HD component video (Y, R-Y, B-Y)
    1 MTP
    1 optional DVI-D; HD-SDI; or interlaced component, S-video, composite video
       Connectors  6 female BNC: RGB or component video
    1 female 15-pin HD: RGB or component video
    1 female RJ-45: output to an MTP device
    1 slot for an optional DVI-D, HD-SDI, or interlaced component/S-video/composite video output card
       Nominal level  1 Vp-p for Y of component videoand S-video, and for G of RGsB
    0.8 Vp-p for SDI
    0.7 Vp-p for RGB and for R-Y and B-Y of component video
    0.3 Vp-p for C of S-video
       Minimum/maximum levels  0.0 V to 1.0 Vp-p
       Impedance  75 ohms
       Scaled resolution  640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9, 1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9, 1400x10506,8, 1440x9006,8,9, 1600x12006,8, 1680x10506,8, 1920x12006,8
    HDTV: 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8
    1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz, 9 = 75 Hz
    Sync
       Input type  RGBHV, RGBS, RGsB, RGBcvS, and component video
       Output type  RGBHV, RGBS, RGsB, and component video (tri-level or bi-level)
       Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
    Optional SDI/HD-SDI input: SMPTE 259M-C, SMPTE 292M
       Input level  2.75 V to 5.0 Vp-p for RGBHV or RGBS
    0.6 Vp-p for component video tri-level sync
    0.3 Vp-p for component video bi-level sync or RGsB
       Output level  TTL: 5.0 Vp-p, unterminated, bi-level or tri-level
       Input impedance  Horizontal: 75 ohms
    Vertical: 510 ohms
       Output impedance  75 ohms
       Polarity  Positive or negative (selectable)
    Control/remote — signal processor
       Serial control port  2 RS-232/RS-422 on 9-pin female D connectors (rear panel)
    1 RS-232, 2.5 mm mini stereo jack (front panel)
       Baud rate and protocol  9600 baud, 8 data bits, 1 stop bit, no parity
       Serial control pin configurations 
          9-pin D connector  RS-232: 2 = TX, 3 = RX, 5 = GND
    RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = Tx+
          2.5 mm mini stereo jack  Tip = TX, ring = RX, sleeve = GND
       Ethernet control port  1 RJ-45 female connector
       Ethernet data rate  10/100Base-T, half/full duplex with autodetect
       Ethernet protocol  ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
       Ethernet default settings  Link speed and duplex level = autodetected
    IP address = 192.168.254.254
    Subnet mask = 255.255.0.0
    Gateway = 0.0.0.0
    DHCP = off
       Web server  Up to 200 simultaneous sessions
    40 MB nonvolatile user memory
       Program control  Extron's control/configuration program for Windows®
    Extron's Simple Instruction Set (SIS)
    Microsoft® Internet Explorer®, Telnet
    General
       Power  100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal
       Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
    Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
       Cooling  Convection, vents on sides and top
       Mounting 
          Rack mount  Yes, with included brackets.
          Furniture mount  Yes, with optional under-desk or through-desk mounting kit
       Enclosure type  Metal
       Enclosure dimensions  1.7" H x 17.5" W x 12.0" D  (1U high, full rack wide)
    (4.3 cm H x 44.4 cm W x 30.5 cm D)
    (Depth excludes connectors and knobs.)
       Product weight  6.8 lbs (3.1 kg)
       Shipping weight  11 lbs (5 kg)
       DIM weight  12 lbs (6 kg)
       Vibration  ISTA 1A in carton (International Safe Transit Association)
       Regulatory compliance 
          Safety  CE, c-UL, UL
          EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
       MTBF  30,000 hours
       Warranty  3 years parts and labor
Product Diagram