|
[14040]EXTRON USP 405 DI/O [SDI Input & Output] [°¡°Ý¹®ÀÇ] |
|
|
|
|
100000ÀÌ»ó ±¸¸Å½Ã ¹«·á¹è¼Û
³³Ç°/³³±â °ßÀû¿äûÀº ÀüÈÁֽñ⠹ٶø´Ï´Ù. |
|
|
|
|
|
|
|
|
|
Video input |
Number/signal type |
1 RGBHV/RGBS/RGsB computer video with 1 local monitor loop-through 1 RGBHV/RGBS/RGsB computer video, RGBcvS, component video (Y, R-Y, B-Y), S-video, or composite video 1 S-video 1 composite video 1 SDI (optional) |
Connectors |
(2) 15-pin HD female: RGB computer video input and loop-through 1 x 5 BNC female: RGB computer video, component video, S-video, or composite video input 2 BNC female: composite video input and loop-through (2) 4-pin mini DIN female: S-video input and loop-through 1 BNC female: optional SDI digital component video input |
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
Minimum/maximum levels |
Analog: 0.3 V to 2 Vp-p with no offset |
Impedance |
75 ohms |
Horizontal frequency |
|
Input 1 |
24 kHz to 100 kHz |
Input 2 RGB, RGBS, HD component video |
24 kHz to 100 kHz |
Input 2 RGBcvS, component video, S-video, composite video |
15 kHz |
Inuts 3 and 4 |
15 kHz |
Input 5 |
CCIR 601/ITU-RBT.601 (270 Mbps) |
Vertical frequency |
30 Hz to 120 Hz |
Resolution range |
Autoscan 640 x 480 to 1600 x 1200* Input resolutions above 1400x1050 are undersampled. |
Return loss |
<-30 dB @ 5 MHz |
DC offset (max. allowable) |
0.5 V |
External sync (genlock) |
0.3 V to 1.0 Vp-p |
|
Video processing |
Decoder |
9 bit digital |
Encoder |
10-bit digital |
Digital sampling |
24 bit, 8 bits per color; 140 MHz |
Colors |
16.78 million |
Horizontal filtering |
8 levels |
Vertical filtering |
8 levels |
|
Video output |
Number/signal type |
6 RGBHV, RGBS, component video (Y, R-Y, B-Y), optional SDI digital component video (CCIR 601/ITU-RBT.601), S-video, composite video |
Connectors |
1 x 5 BNC female (RGB, HD component video) (1) 15-pin HD female (RGB, HD component video) 3 BNC female (component video) (1) 4-pin mini DIN (S-video) 1 BNC female (composite video) 1 BNC female (optional SDI digital component video) |
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
Minimum/maximum levels |
0 V to 2.0 Vp-p |
Impedance |
75 ohms |
Scaled resolutions |
640x4801,3,4,6, 800x6001,3,4,6, 832x6243,4,6, 848x4803,6, 852x4803,6, 1024x7681,3,4,5,6, 1280x7682,6, 1280x10241,3,6, 1360x7653,6, 1365x10243,6, 1400x10501,3,6, 576p1,6, 720p3,6, 1080p3,6, 1080i1,3,6, NTSC, PAL 1 = at 50 Hz, 2 = at 56 Hz, 3 = at 60 Hz, 4 = at 75 Hz, 5 = at 85 Hz, 6 = locked to the current input's vertical refresh rate (up to 60 Hz) (Accu-RATE Frame Lock) |
|
Return loss |
-30 dB @ 5 MHz |
DC offset |
These data are for output with input at 0 offset: ¡¾25 mV maximum for RGB 350 ¡¾25 mV maximum for Y of component video/S-video, composite video 650 ¡¾25 mV maximum for R-Y & B-Y of component video, C of S-video |
Switching type |
Triple-Action |
|
Sync |
Input type |
Autodetect (RGBHV, RGBS, RGsB), and component |
Output type |
RGBHV, RGBS, and component video (tri-level or bi-level) |
Standards |
NTSC 3.58, NTSC 4.43, PAL, and SECAM |
Input level |
2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB |
Output level |
TTL: 5.0 Vp-p, unterminated, bi-level or tri-level |
Input impedance |
510 ohms |
Output impedance |
75 ohms |
Max. input voltage |
5 Vp-p |
Polarity |
Positive or negative (selectable) |
|
Control/remote — switcher/scaler |
Serial control port |
RS-232, 9-pin female D connector |
Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
Serial control pin configurations |
2 = Tx, 3 = Rx, 5 = GND |
Contact closure |
9-pin female D connector |
Contact closure pin configurations |
1 = input 1, 4 = input 2, 6 = input 3, 7 = input 4, 8 = input 5 |
IR controller module |
IR 801 (optional) |
Program control |
Extron's control/configuration program for Windows¢ç Extron's Simple Instruction Set (SIS¢â) |
|
General |
Power |
100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal |
Temperature/humidity |
Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensing Operating: +3 to +122 ¡ÆF (0 to +50 ¡ÆC) / 10% to 90%, noncondensing |
Cooling |
Convection, vents on sides |
Mounting |
|
Rack mount |
Yes |
Enclosure type |
Metal |
Enclosure dimensions |
1.8" H x 17.5" W x 12.0" D (1U high, full rack wide) (4.6 cm H x 44.4 cm W x 30.5 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.) |
Product weight |
|
USP 405 |
6.3 lbs (2.9 kg) |
USP 405, SDI in & output |
6.9 lbs (3.1 kg) |
Shipping weight |
|
USP 405 w/SDI in & output |
12 lbs (6 kg) |
All other models |
11 lbs (5 kg) | |
|
|
|
|
|