HOME > 각종 셀렉터/분배기/변환 컨버터 > 영상디코더 (AV신호->RGB / HDMI 변경) > 컴포지트,Svideo신호를 RGB신호로
확대보기

[13649]ISM HDSDI (컴포지트 --> HD-SDI 신호)
스   펙 : ISM HDSDI (컴포지트 --> HD-SDI 신호
제조사 : 익스트론
수   량 : 개
판매가 : 3,220,000 원
적립금 : 0 원
100000이상 구매시 무료배송 납품/납기 견적요청은 전화주시기 바랍니다.
장바구니담기 바로주문하기
이전화면
ISM 824
Video
   Routing  8 x 2 matrix up to 8 x 8 matrix, depending on model and configuration
   Gain  Unity (outputs 1 and 2)
   Bandwidth  450 MHz (-3 dB), fully loaded (main unit, outputs 1 and 2)
350 MHz (-3 dB) for wideband single/dual boards
   Crosstalk  -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz (outputs 1 and 2)
   Switching speed  200 ns (max.) (outputs 1 and 2)
Video input — main unit
   Number/signal type  8 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (interlaced or progressive), S-video, composite video
   Connectors  8 x 5 female BNC
   Nominal level  1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels  Analog: 0.5 V to 2.0 Vp-p with no offset at unity gain
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 108 kHz
   Vertical frequency  50 Hz to 120 Hz
   Return loss  <-30 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
Sync — main unit
   Input type  RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video
   Output type  RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video (follows input) (outputs 1 and 2)
   Standards  NTSC 3.58, PAL
   Input level  0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level  AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
   Input impedance  510 ohms
   Output impedance  75 ohms
   Max. input voltage  5.0 Vp-p
   Max. propagation delay  15 ns, input channel to channel
   Max. rise/fall time  4 ns
   Polarity  Positive or negative (follows input)
Video processing — ISM RGB
   Digital sampling  24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
   Colors  16.78 million
Video output — ISM RGB scaled output
   Number/signal type  1 scaled or pass-through RGBHV, RGBS, RGsB, HD YUV component video
   Connectors  1 x 5 BNC female
   Nominal level  1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels  0.0 V to 0.7 Vp-p for RGB 0.0 V to 1.0 Vp-p for component video and G of RGsB
   Impedance  75 ohms
   Scaled resolution  640x4801,2,3,4,5,6, 800x6001,2,3,4,5,6, 852x4801,2,3,4,5, 1024x7681,2,3,4, 1024x8521,2,3,4, 1024x10241,2,3, 1280x7681,2,3,4, 1280x8001,2,  1280x10241,2,3, 1360x7651,2,3, 1360x7681,2,3, 1365x10241,2, 1366x7681,2,3, 1400x10501,2, 1440x9002,7, 1600x12001,2, 1680x10502, 1920x12002
HDTV: 480p2,8, 576p1,5, 720p1,2,8, 1080p1,2,8, 1080i1,2,8, 1080p Sharp
1 = at 50 Hz, 8 = at 59.94 Hz, 2 = at 60 Hz, 3 = at 72 Hz, 7 = at 75 Hz, 4 = at 96 Hz, 5 = at 100 Hz 6 = at 120 Hz
Sync — ISM RGB
   Output type  RGBHV, RGBS, RGsB
Bi-level or tri-level on Y, R-Y, B-Y channels (component video)
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
   Output level  TTL: 5.0 Vp-p, unterminated
   Output impedance  75 ohms
   Polarity  Positive or negative (switch selectable)
Video processing — ISM VS
   Digital sampling  24 bit, 8 bits per color: 13.5 MHz standard (video)
   Colors  16.78 million
Video output — ISM VS scaled output
   Number/signal type  1 scaled RGBHV, RGBS, RGsB, HD YUV component video
   Connectors  1 x 5 BNC, female
   Nominal level  1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels  0.0 V to 1.0 Vp-p
   Impedance  75 ohms
   Scaled resolution  640x4801,2, 800x6001,2, 852x4801,2, 1024x7681,2, 1280x7681,2, 1280x10241,2, 1360x7651,2, 1360x7681,2, 1365x10241,2, 1366x7681,2, 1400x10501,2
 HDTV: 480p2, 576p1, 720p1,2, 1080p1,2, and 1080i1,2
1 = at 50 Hz, 2 = at 60 Hz
Sync — ISM VS
   Input type  Pass-through RGBHV, RGBS, RGsB
   Output type  RGBHV, RGBS, RGsB
Bi-level on Y, R-Y, B-Y channels (component video)
   Standards  NTSC 3.58, NTSC 4.43, PAL, SECAM
   Output level  TTL: 5.0 Vp-p, unterminated
   Output impedance  75 ohms
   Max. input voltage  5.0 Vp-p
   Max. propagation delay  30 ns (RGB pass-through)
Video output — wideband outputs:
   • Main unit outputs 1 and 2 (pass-through)  
   • ISM 1WB single-output wideband board 
   • ISM 2WB dual-output wideband board 
   Number/signal type  RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (progressive/interlaced), S-video, composite video (follows input type)
   Connectors 
      Wideband (main unit)  2 x 5 BNC, female
      ISM 1WB  1 x 5 BNC, female
      ISM 2WB  (2) 15-pin HD, female
   Nominal level  1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video
   Minimum/maximum levels  0.0 V to 0.7 Vp-p (follows input)
Video processing  — ISM DVI
   Digital sampling  24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
   Colors  16.78 million
Video output  — ISM DVI scaled output
   Number/signal type  1 scaled DVI-D
   Connector  1 female DVI-D
   Nominal level  0.8 Vp-p
   Impedance  75 ohms
   Scaled resolution  640x4804,5,6, 800x6004,5,6, 852x4804,5,6, 1024x7684,5,6, 1024x8524,5,6, 1024x10244,5,6, 1280x7684,5,6, 1280x8004,5, 1280x10244,5,6, 1360x7654,5,6, 1365x7684,5,6, 1365x10244,5,6, 1366x7684,5,6, 1400x10504,5, 1440x9005,7, 1600x12004,5, 1680x10505, 1920x12005
HDTV: 480p5,8, 576p4, 720p4,5,8, 1080i4,5,8, 1080p1,2,3,4,5,8, 1080p Sharp
1 = 24 Hz, 8 = at 59.94 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz, 5 = 60 Hz, 6 = 72 Hz, 7 = 75 Hz
Video processing  — ISM HDSDI
   Digital sampling  24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
   Colors  16.78 million
Video output  — ISM HDSDI scaled outputs
   Number/signal type  1 scaled HD-SDI (SMPTE 292M)
   Connector  1 female BNC
   Nominal level  0.8 Vp-p
   Impedance  75 ohms
   Scaled resolution  720p1,2,3,4,5,6, 1080i4,5,6, 1080p1,2,3
1 = 24 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz, 5 = 59.94 Hz, 6 = 60 Hz
Video  — ISM MTP UT 4DA
   Gain  Unity
Video output  — ISM MTP UT 4DA
   Number/signal type  4 sets of proprietary analog signals
   Connectors  4 female RJ-45
   Maximum resolution  1920x1200
Video  — ISM SC
   Digital sampling  24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
   Colors  16.78 million
   Horizontal filtering  4 levels
   Flicker filtering  4 levels
Video output  — ISM SC
   Number/signal type  1 NTSC/PAL RGsB, component video (with bi-level sync), or S-video
1 NTSC/PAL composite video
   Connectors  3 female BNC
1 female BNC
   Nominal levels  1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video
   Minimum/maximum levels  0.0 V to 1.0 Vp-p (follows input)
   Impedance  75 ohms
Sync  — ISM SC
   Output type  RGsB, bi-level for component video
   Standards  NTSC 3.58, PAL
   Output impedance  75 ohms
   Output level  NTSC or PAL standard levels
Audio  — main unit
   Gain  Unbalanced output: -6 dB
Balanced output: 0 dB
   Frequency response  20 Hz to 20 kHz, ±0.5 dB
   THD + Noise  0.03% @ 1 kHz at nominal level, 0 dB gain
   S/N  >90 dB, at maximum rated output drive
   Crosstalk  <80 dB @ 1 kHz, fully loaded
   Stereo channel separation  >90 dB @ 1 kHz
   CMRR  >75 dB @ 20 Hz to 20 kHz
Audio  — ISM MTP UT 4DA
   Number/signal type  4 sets of proprietary signals
   Connectors  4 female RJ-45 (shared with video)
   Gain  Unbalanced output: 0 dB (unity; balanced output: +6 dB
   Frequency response  20 Hz to 20 kHz, ±1 dB
   THD + Noise  0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N  >70 dB at maximum output (unweighted)
   CMRR  <-43 dB @ 1 kHz
Audio input  — main unit
   Number/signal type  8 stereo, balanced/unbalanced
   Connectors  (8) 3.5 mm captive screw connectors, 5 pole
   Impedance  >10k ohms, balanced/unbalanced, DC coupled
   Nominal level  +4 dBu (1.23 V), -10 dBV (316 mV)
   Maximum level  +19.5 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment  -18 dB to +24 dB
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output  — main unit
   Number/signal type  2 (base model, upgradeable to 8) stereo, balanced/unbalanced
   Connectors  (2, upgradeable to 8) 3.5 mm captive screw connectors, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.5 dB channel to channel
   Maximum level (Hi-Z)  >+21 dBu balanced or >+15 dBu unbalanced at 1% THD+N
   Maximum level (600 ohm)  >+15 dBu, balanced or unbalanced, at stated 1% THD+N
   Output volume range  0 to 64 (-64 dB to 0 dB) increments from steps 1 through 64
Control/remote — switcher
   Serial host control port  1 rear panel RS-232 or RS-422, 9-pin female D connector
1 front panel RS-232 2.5 mm mini stereo jack
   Baud rate and protocol  9800 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      9-pin D connector  RS-232: 2 = TX, 3 = RX, 5 = GND
RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = TX+, 8 = RX+
      2.5 mm mini stereo jack  RS-232: tip = TX, ring = RX, sleeve = GND
   Ethernet control port  1 RJ-45 female connector
   Ethernet data rate  10/100Base-T, half/full duplex with autodetect
   Ethernet protocol  ARP, ICMP (ping), TCP/IP, Telnet, HTTP
   Default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
   Program control  Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Netscape Navigator, Telnet
Control/remote  — ISM MTP UT 4DA (pass-through)
   Serial control  4 RS-232 on (2) 3.5 mm captive screw connectors, 3 pole:
2 bidirectional (via outputs 1 and 3), 2 unidirectional (via outputs 2 and 4)
   Serial control pin configuration  1 = TX, 2 = RX, 3 = GND
   Baud rates  Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance will vary based on baud rate and cable length.)
   Protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE     Protocol is mirrored between the transmitter board and the receiver.
General
   Power  100 VAC to 240 VAC, 50-60 Hz, 75 watts, internal
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Fan, left to right (as viewed from the front panel)
   Mounting 
      Rack mount  Yes
   Enclosure type  Metal
   Enclosure dimensions  5.25" H x 17.5" W x 11.2" D (3U high, full rack wide)
(13.3 cm H x 44.4 cm W x 28.4 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)
   Product weight 
      Main unit  14 lbs (6.3 kg)
      Optional boards  0.5 lbs (0.3 kg)
   Shipping weight 
      Main unit  21 lbs (10 kg)
      Optional boards  1 lb (1 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety  CE, CUL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
   MTBF  30,000 hours
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(7.6-031809-D8)