HOME > 50옴,75옴,기타 산업용케이블 > RS232 데이타케이블 / 커넥터 > RS232 ↔ 422/485 컨버터
확대보기

[12815]RS-232 to RS-485/422 Converter (TCC-100)[금액문의]
스   펙 : Serial Converter / RS232 ↔ RS422/RS485(RTS,CTS) / DIN-Rail / 16 KV ESD Surge Protector / RS422,485(터미널블록), RS232(DB9F) / 전원아답터 별매
제조사 : MOXA
수   량 : 개
판매가 : 0 원
적립금 : 0 원
100000이상 구매시 무료배송 납품/납기 견적요청은 전화주시기 바랍니다.
장바구니담기 바로주문하기
이전화면
[제품의 사진은 실제와 다를수 있으며 제조사의 사정에 따라 변경될수 있습니다.]
Isolated RS-232 to RS-485/422 Converter


RS-232 to RS-422 conversion with RTS/CTS support
RS-232 to 2/4-Wire RS-485 conversion
Isolation Protection, 2 KV (TCC-100I) for both RS-422/485 signals and power
Wall and DIN-Rail mountable
Plug-in screw terminal Block for easy 422/485 wiring
PWR, Tx, and Rx LEDs
Surge protection, 16 KV ESD
Operating Temperature from -20°C to 60°C

Many important devices used in today,s industrial environment are still designed for use with an RS-232 interface. However, RS-232 is a point-to-point interface, and it imposes a distance limitation of only 15 meters between the device and the computer. To overcome these limitations, many users employ RS-232 to RS-422/485 converters, allowing RS-232 devices to connect to an industrial RS-422 or RS-485 network and transmit data over distances up to 1.2 km.

TCC-100/100I is an isolated RS-232 to RS-422/485 converter designed for users who need an industrial grade interface conversion product to extend RS-232 transmission distance and increase networking capability. Its superior industrial application design, which includes DIN-rail mounting, terminal block wiring, external terminal block power, and optical isolation for system protection, makes TCC-100/100I suitable for use in critical industrial environments. Simply put, your RS-232 devices can be used as part of an industrial RS-422/485 network, but without any hardware or software changes.

Automatic Data Direction Control (ADDC)
ADDC™ (Automatic Data Direction Control), a MOXA leading technology, uses a clever hardware solution to take care of the RS-485 data flow control problem. The RS-485 standard originally used half-duplex communication and handshaking signals such as RTS/CTS to control the direction of data flow. The TCC-100/100I converter uses embedded ADDC™ technology, a hardware data flow solution, to automatically sense and control data direction, making the handshaking signal method obsolete.

Isolation Protection
The electrical Isolation technology uses two photo couplers to create a gap in each electrical signal. One photo coupler transforms the electrical signal into a light signal, which is transmitted across a small gap, and then the other photo coupler transforms the light back into an electrical signal on the other side. In this way, the two electrical circuits are completely isolated from each other, limiting the damage that could otherwise be caused by power surges in the electrical signal.

Auto Baud Rate Detection
TCC-100/100I incorporates a method for automatically detecting the serial signal baud rate by hardware. This is an extremely convenient feature for the user. Even if a device’s baud rate is changed, the signal will still be transmitted through the RS-232 to RS-422/488 converter without problem.

RTS/CTS RS-422 Handshaking Signal
TCC-100/100I provides an RS-422 handshaking signal support. The RTS and CTS signals provide an RS-422 handshaking signal, reducing the chance of data error.